Clean Flow Heater

Low to medium output heater

Heaters have become essential in many composites manufacturing operations. The MVP heaters feature: lower flow rates, better control over temperature changes and an easy-maintenance design. Our heaters are thoughtfully designed to adjust to your operation, rather than having your operation adjust to your heater.

The MVP Clean Flow Heater (CFH) is designed to the allow higher flow rates, give better control over temperature change, and allow for easy maintenance. Simply adjust the temperature control to the desired level to maintain the temperature indicated on the external thermometer. There is a fluid filled bulb and capillary tube placed near the heater core to maintain a stable and constant temperature. The thermal limiter in the circuit is a safety feature that breaks the circuit to the heating element if the heater block temperature exceeds a safe level.

There are several models of MVP’s Clean Flow Heater (CFH). For accuracy of parts ordering and maintenance, refer to the appropriate part drawing for your specific model in the manual below.

Specs & Details

Models

CFH-2110-1

Specifications:

  • Dimensions 13.75” x 11.25” x 9.75”
  • Weight: 49 lbs
  • Voltage Tolerance: 110 VAC, 1 PH @ 15.30 A, 1500 W
  • Max Working Fluid Pressure: 3000 psi
  • Max Fluid Temperature: 140° F
  • Wetted Parts: 303/304 Stainless Steel, Carbon Steel, Zinc Plated Steel, Aluminum, PTFE, UHMWPE, Chemically Resistant O-rings

CFH-2220-1

Specifications:

  • Dimensions: 13.75” x 11.25” x 9.75”
  • Weight: 49 lbs
  • Voltage Tolerance: 220 – 240 VAC, 1 PH @ 7.57 – 6.94 A, 1500 W
  • Max Working Fluid Pressure: 3000 psi
  • Max Fluid Temperature: 140° F
  • Wetted Parts: 303/304 Stainless Steel, Carbon Steel, Zinc Plated Steel, Aluminum, PTFE, UHMWPE, Chemically Resistant O-rings

CFH-4000-1

Specifications:

  • Dimensions: 18.5” x 11.25” x 9.75”
  • Weight: 61 lbs
  • Voltage Tolerance: 220 – 240 VAC, 1 PH @ 15.15 – 13.88 A, 3000 W
  • Max Working Fluid Pressure: 3000 psi
  • Max Fluid Temperature: 140° F
  • Wetted Parts: 303/304 Stainless Steel, Carbon Steel, Zinc Plated Steel, Aluminum, PTFE, UHMWPE, Chemically Resistant O-rings

Air Interlock

Pressure and Differential Pressure Switch

Features:

  • Adjustable setpoints 15-100% of range
  • Fixed or limited adjustable deadband
  • Wide selection of switch elements
  • Explosion proof enclosure provides uncompromising protection
  • Special designs for NACE & fire applications
  • SIL 3 Capable (B and D series only)

Specifications:

  • Setpoint: Factory set or field adjustable
  • Setpoint ±1% of full range (Additional setpoint shift of Repeatability: ±1% of range per 50 °F from initial setpoint set at 70 °F typical)
  • Enclosure Rating: B4/Hydraulic: NEMA 4X, IP66 B7: NEMA 7/9, IP66
  • Enclosure Material: Epoxy coated aluminum (standard) Optional: 316 stainless steel (NEMA 7/9 only)
  • Diaphragm Material: Buna N, Viton, Teflon, SS, Monel
  • Pressure 1⁄4 NPT Female (standard) Connection: Optional: 1⁄2 NPT Female , 1⁄4 NPT Female & 1⁄2 NPT Male combo
  • Electrical Output: SPDT or DPDT
  • Electrical 3⁄4 NPT Female (standard) Termination: Optional: 1⁄2 NPT Female
  • Ambient –20°F to 150°F (–28°C to 65°C) Temperature Range: All units calibrated at 70 °F
  • Process 0 °F to 150 °F (Buna N or Teflon diaphragm) Temperature: 20 °F to 300 °F (Viton diaphragm) 0°F to 300°F (SS or Monel diaphragm)
  • Pressure Ranges: Pressure: Vac-3000# Differential: 0-600#D Hydraulic: 1000-7500#
  • Approvals: UL E34743 (B4/D4) E38812 (B7/D7) CSA: 55541 ATEX: Sira 02ATEX1391X (B7/D7 with XCN) IECEx SIR 14.0077X FM: Limit Contol and Steam Limit Control

Product Support

Still have Questions?

Have more questions about the Clean Flow Heater or need product support?

Contact Us

Compatible Accessories