Available in Internal & External Mix configurations
This precision is the tool used to correct many of the quality issues, such as porosity, pre-release, post curing, cracking, alligatoring, inconsistent thickness and more that currently face composites manufacturers.
The Patriot™ Gelcoat Systems feature a deep induction heat hardened Fluid Section which is then coated with a thick hard chrome layer to increase the wear characteristics of the system, allowing it to run for longer periods.
Both the Fluid Section and Catalyst Pump on Patriot™ feature the new “self-healing” seal that has the lowest coefficients of friction available today. This seal does not require packing adjustments, and greatly reduces the problems associated with heat buildup and wear.
Patriot™ Systems are built with modular components to create the optimum configuration for your needs, and keeps you running. Utilizing quick-change components extends the system life and allows for little or no down time. The major components change out in 10 minutes or less.
Choose your preference: available in internal and external mix configurations that both deliver versatile and precise gelcoat performance.
Patriot ™ Gelcoat System
Output Capabilities: approximately 1 – 6 lbs./min. (.45 – 2.7 kg/min.) Catalyst Percentage: 0.75% to 2.5% by volume Air Consumption: 18 CFM (142 – 198 L/min.) Displacement: 2.45 in.3 (40.15 cc)/stroke or 4.90 in.3 (80.3 cc)/cycle Pump Ratio: 5″ Powerhead, 15:1 – 7″ Powerhead 30:1 Maximum Air Input Pressure: 100 psi (7 bar, 0.7 MPa)
Patriot ™ Multi-Color System
Output Capabilities: approximately 1.5-7 lbs/min (.85 – 3.4 kg/min) Catalyst Percentage: 0.75% to 2.5% by volume Pump Ratio: 15:1 Maximum Air Input Pressure: 100 psi (7 bar, 0.7 MPa)