Try our technical document filters
Home products Mixers & Agitators Mixers & Agitators
Our mixing equipment is designed to mix materials consistently every time and keep maintenance time down. With quick, clean, and easy material transfer, our mixers are an efficient solution.
50160-1: Stabilized mount plate, 0.95 HP, direct drive, 30 in (76 cm) shaft, two flipout blades. Two blade sets push materials from the bottom up.
50000-1: Stabilized mount plate, 0.95 HP, direct drive, 30 in (76 cm) shaft, three auger style impellers. Top blade pulls materials down while two bottom blades pull materials up.
M-AGD-40-30-G: Drum cover, 0.95 HP, gear reduced 25:1 ratio, two 12 in (30 cm) fixed angled blade sets. Top blade set pushes material down while bottom blade set pushes material up.
BHA-1000-S: Clamping mount, 0.95 HP, angled direct drive, ¾ in (2 cm) access, 35 in (89 cm) shaft with 20 in (51 cm) auger style blade. Blade pulls materials from the bottom up.
BHA-1000-L: Clamping mount, 0.95 HP, angled direct drive, 2” access, 35” shaft with 20’’ auger style blade. Blade pulls materials from the bottom up.
M-AGD-40: Drum cover, 0.95 HR, gear reduced 25:1 Ratio, (2) 14” fixed angled blade sets. Top blade set pushes materials down while bottom blade set pushes materials up. M-AGD-40-SS: Same as the M-AGD-40 set up with stainless steel shaft & blade sets. Top blade set pushes materials down while bottom blade set pushes materials up.
M-AGD-40-ITW: Drum cover, 1.7 HP, gear reduced 25:1 RATIO, (4) 14” fixed angled blade sets. Top blade sets push materials down while bottom blade sets push materials up. M-AGD-50-ITW: Drum cover, 1.7 HP, gear reduced 5:1 RATIO, (4) 14” fixed angled blade sets. Top blade sets push materials down while bottom blade sets push materials up.
5 AGT-PM-500: Pail cover, 0.45 HP, angled direct drive, cage style blade. Within the cage design, the horizontal bottom blades push up, horizontal top blades push down, and the vertical side blades maintain mixing action within the unit. This design reduces splashing and the imparting of air into materials.
50160-3: Stabilized plate mount, 0.95 HP, direct drive, 36” shaft, (2) flipout blade sets. Two blade sets push material from the bottom up.
M-AGD-40-TT: 23” access cover, 0.95 HP, gear reduced 25:1 ratio, (1) EA 14” & 26” fixed angled blade sets. The top blade set pushes materials down while the bottom blade set pushes materials up.
M-AGD-35: 0.95 HP, gear reduced 25:1 ratio, (2) 14” fixed angled blade sets. The top blade set pushes materials down while the bottom blade set pushes materials up. M-AGD-35-SS: Same as M-AGD-35 set up with stainless steel shaft & blade sets. The top blade set pushes materials down while the bottom blade set pushes materials up.
AL-1000: Stationary lift station, floor mount, Lid clamping frame, air cylinder, air controls. AL-1000-P: Portable AL-1000 set up with a wheel package. Agitator lifts extract an agitator from a drum using a pneumatic air cylinder, then lowers it into the new drum. MVP Agitator Lifts were designed for easy operation with a single air valve to control the lifting and lowering of the agitator. Utilizing an agitator lift provides a safer, cleaner environment for employees who were previously lifting and handling the agitator during drum changes, while also allowing any excess material to drain into the drum being changed.
M-AGD-AL: AL-1000 stationary lift with M-AGD-40 agitator
M-AGD-AL-P: AL-1000-P portable lift with M-AGD-40 agitator
M-AGD-AL-ITW: AL-1000 stationary lift with M-AGD-40-ITW agitator
Want to learn more? For more information or a quote on our products please contact us.