Flush Valve

• Problem Flush Button sticking.
  • Possible Causes: Resin buildup around button o-ring O-E-008 sticking in flush
    valve.
    
    Solution: Disassemble and clean.
• Problem Flush leaking around Flush Button.
  • Possible Causes: O-ring O-E-008 worn or damaged.
    Solution: Replace.
• Problem Flush not shutting off.
  • Possible Causes: Button is sticking.
    Solution: See Above.
  • Possible Causes: O-ring O-E-007 or O-A-007 worn or damaged.
    Solution: Replace.
• Problem Flush leaking between Flush Neck #5104-22-1 and Flush Body #5104-24-1.
  • Possible Causes: Flush Valve loose.
    Solution: Tighten Valve to Block.
  • Possible Causes: Seal 5104-2-1 damaged or worn.
    Solution: Replace.
• Problem Leaking around Elbow TRU-1021 Fittings.
  • Possible Causes: Fitting Seals 7304-3-1 damaged or worn.
    Solution: Replace.
• Problem Leaking around Elbow Screw.
  • Possible Causes: Elbow or Elbow Seals damaged.
    Solution: Replace Elbow #TRU-1021.