Standard Patriot Gelcoater

This precision is the tool used to correct many of the quality issues, such as porosity, pre-release, post curing, cracking, alligatoring, inconsistent thickness and more that currently face composites manufacturers.

The Patriot™ Gelcoat Systems feature a deep induction heat hardened Fluid Section which is then coated with a thick hard chrome layer to increase the wear characteristics of the system, allowing it to run for longer periods.

Both the Fluid Section and Catalyst Pump on Patriot™ feature the new “self-healing” seal that has the lowest coefficients of friction available today.  This seal does not require packing adjustments, and greatly reduces the problems associated with heat buildup and wear.

Patriot™ Systems are built with modular components to create the optimum configuration for your needs, and keeps you running. Utilizing quick-change components extends the system life and allows for little or no down time.  The major components change out in 10 minutes or less.

Choose your preference: available in internal and external mix configurations that both deliver versatile and precise gelcoat performance.

STANDARD SYSTEM

Output Capabilities:
approximately 1 - 6 lbs./min. (.45 - 2.7 kg/min.)

Catalyst:
1% to 4% by volume

Air Consumption:
5 - 7 CFM (142 - 198 L/min.)

Displacement:
2.45 in.3 (40.15 cc)/stroke or 4.90 in.3 (80.3 cc)/cycle

Pump Ratio:
15:1

Maximum Fluid Outlet Pressure:
1500 psi (76 bar, 7.6 MPa)

Maximum Air Input Pressure:
100 psi (7 bar, 0.7 MPa)

PORTABLE SYSTEM

Output Capabilities:
approximately 1 - 6 lbs./min. (.45 - 2.7 kg/min.)

Catalyst:
0.75% to 2.5% by volume

Pump Ratio:
30 :1

Maximum Fluid Outlet Pressure:
1500 psi (76 bar, 7.6 MPa)

Maximum Air Input Pressure:
100 psi (7 bar, 0.7 MPa)